Shark-5 5 Axis Double Head Automatic Cutting Machine

5 AXIS DOUBLE MITRE SAW WITH A FIXED UNIT ON THE LEFT AND THE OTHER ONE MOVABLE.

Full automatic moving double head cutting machine with servo-motor driven on the front, servo-motor driven on the 5 independent axes, right-hand cutting head on the longitudinal axle: It is a machine that can make double-head cutting and automatic serial cutting (cutting corner chopper with drive).
Automatic internal and external tilting movement at all intermediate angles with actuators: internal: 135 °, external: 22.5 °. inclination and rotation angle machine has, 45 to 90 degree.
Full automatic cutting at all intermediate angle
there is also 2 more movement for both head, which lets cut larger profiles with 600 mm sawblade.

Shark-5 5 Axis Double Head Automatic Cutting Machine

FEATURES

• Electro-welded monolithic steel body providing maximum durability and precision.
• Adjustable hydro-pneumatic saw feed movement from rear to forward speed.
• Back-to-back saws that provide more rigid cutting
• Large cutting capacity
• Pneumatic movable protection covers that completely close the cutting area, right to left and up and down
• Small part cutting with 0.1mm precision (left head cuts, right head)
• Not only 90, but can cut at all intermediate angles. (Radial front façades, such as connecting nuts)
• Turkish and english control panel

VIDEO

EQUIPMENT

2 diamond saw blades (Ø = 600 mm.)
Cutting depth adjustment device. (Adjusting the saw output distance)
Horizontal pneumatic profile holders (2 pcs per head)
Pneumatic profile holders. (1 head each)
Right-hand head, movable profile support conveyor
Sawdust pickers under machine
Automatic saw lubrication / cooling system. (in both heads)

POSITIONING SYSTEM WITH GRAPHIC LCD DISPLAY, WHICH IS ABLE TO

manage single cuts
memorize up to unlimited profile codes and their values
manage up to unlimited frames style, each one including up to 30 rows of programming
manage the calibration cycle automatically
manage a linear correction factor into defined zones
memorize cutting list already calculated by USB key
manage a label printer
manage software for automatic cut-off
manage software expanding capacity of cutting length.

Shark-5 5 Axis Double Head Automatic Cutting Machine

Shark-5 5 Axis Double Head Automatic Cutting Machine

5 AXIS DOUBLE MITRE SAW WITH A FIXED UNIT ON THE LEFT AND THE OTHER ONE MOVABLE.

FEATURES

FEATURES

FEATURES

VIDEO

EQUIPMENT

SOFTWARE

POSITIONING SYSTEM WITH GRAPHIC LCD DISPLAY, WHICH IS ABLE TO

KONTAKT US

KONTAKT US

PRODUKTE