5 AXIS ALUMINUM PROFILE MACHINING CENTER MET WITH CUSTOMERS

The aluminum profile processing center is here to increase your production, increase your capacity, and save money. This Aluminum machining center offers service as an Aluminum machining center with a working length of 4800 mm as a 5 axis and a working length of 5500 mm as a 4 axis. In addition, 4 and 5 axis Aluminum processing capacity should be able to be supplied to customers with a closed protection cabinet with the possibility of ownership.One of the best features it offers is that it has 2 small special moving zero points.After the high-quality and transparent negotiations with our customers, we have a minimum installation time and we have produced this machine for you for ergonomic use.This machine has the ability to process aluminum profiles, stainless steel profiles at a lower cost, in a better quality way.If you are looking for a safer production, there is a cabin in the machine.It also has the technical feature of reducing noise, keeping garbage and sawdust in one place.This system has a special 3d programming software also igs, stp, .step., it has the ability to read 3d data such as iges.Apart from these possibilities, it has a MeCloud system that can support Industry 4.0 and Industry 5.0 requirements.

Technical Specifications:

— The depth of the aluminum machining center is set to 2450 mm.

— The weight of the aluminum machining center is set to 5250 mm.

— The aluminum machining center has a height of 2500 mm with a retracted z-axis without an optional roof.

— The total length of the aluminum machining center is set to 7.100 mm.

-Based on the maximum profile processing length of the aluminum machining center (as 5 October), the double profile processing is 2400 mm, the long profile processing is 4800 mm.

Based on the maximum profile processing length of the aluminum machining center (as 4 October), the double profile processing is 2,750 mm, the long profile processing is 5,500 mm.

— The maximum facade profile processing length of the aluminum processing center is 5500mm, processing length is longer than 11000 meters.

— The operating accuracy of the aluminum machining center is +/-0.1 mm

— Considering the machining direction of the aluminum machining center as 5 October(top,back,front,left side,right side)

— The diameter of the disc milling cutter blade owned by the aluminum machining center is 120 mm.

— The holder positioning feature of the aluminum machining center functions autonomously.

— The holders of the aluminum machining center are 6 standard (+max.4 depends on the request)

-The diameter of the saw, which is one of the most important parts of the aluminum machining center, is 300mm.

— The tool changing feature of the aluminum machining center functions automatically.

— The angled head feature of the aluminum machining center depends on the request of users.

-The spindle motor speed of the aluminum machining center is 20,000rpm based on the maximum.

— The motor power offered by the aluminum processing center is 7.5 kW, S1 (air-cooled)

— The tool holder of the aluminum machining center is ISO30.

-The tool tray positions in the automatic magazine of the aluminum machining center are 10.

— Considering the maximum tool length of the aluminum machining center, 150 mm (from the conical dimension)

–The software owned by the aluminum processing center is MeCAD — MeCam.

— The compressed air supply of the aluminum machining center is 7 bar.

— The CE power supply of the aluminum machining center (UL optional) is 400 V, 3~, 50 Hz.

https://www.mecanicacnc.com/

You can get more information from this site.