NEWS

NEWS

MAK 550 HORIZONTAL RECORDING LAPPING MACHINE DOES NOT RECOGNIZE COMPETITORS IN THE FIELD

MAK 550 Horizontal Recording Lapping Machine

it is a horizontal recording clamp and profile beak lowering machine with manual adjustment on 4 axis, angular manual control on 1 axis, fully automatic operation, manual material feeding.

 

FEATURES:

– The machine can be used for cutting aluminum facade, skylight and joinery profiles,

– provides more comfortable operation with 280mm x 300mm (height x width) processing capacity,

-It has the ability to cut with a sharp nose of 30º,

– Hydro-pneumatic saw feeding (max.Traverse -:800mm)

– Cutting capacity : 185mm/210mm (vertical/horizontal) (when the material is at 90 degrees)

– Angular adjustment for horizontal and vertical sawing

– Rotatable material support (horizontal): left and right 30°, 90°, 45°

– Vertical and horizontal pneumatic profile holders?

– Clamp depth and height adjustment with digital display

– Manual saw positioning

– spray lubrication system with 2 nozzles

– The horizontal saw can be rotated at 30° – 90° – 30°

– The vertical saw can be rotated at 30° – 90° – 30°

– 1 piece Ø=500 mm horizontal carbide saw

-1 pcs Ø=550 mm vertical carbide saw

– Aluminum can be used for facade and joinery profiles.

-2 pcs brake motor 3 kW, 400 V, 50 Hz, (2,800rpm)

– The depth, height and angular axis of the clamp are automatically adjusted manually October

– The angle of the profile binding table (5.October) is again controlled manually.

MAK-550-Yatay-Kayit-Alistirma-Makinesi-

Open chat

CONTACT US

CONTACT US

Contact us to get more detailed information about our products and services and to send your offers.

ARAMA YAP